A few days ago I got a new toy 😉 It is a brand new HP ProLiant DL server with very impressive specs: GB RAM; 2 x Intel Xeon CPU, 10 Cores each; The server comes as U1 standard factor with 8 slots for disks. 4 slots were occupied by disk, each one is 1TB SSD disk. RAID5 is best cost / efficient solution. Setting up RAID was a natural. I have a DL G5 running WinSrvr with a 3 drive (72GB) SAS Raid 5 array on Pi controller. The single array has two partitions. (OS and a data store) Drive 2 has failed and is off line (Amber lite and internittant beeps) I have replacement drives but cannot find step by step instruction on a hot swap and drive rebuild. · Hi All, how would i configure the array in a DL G5 server with 4 72GB drives, requirement being 2 RAID 1 sets (set 1 and 2 both contain 2 x 72Gb drives mirrored). Basically if I lost one drive in each array, the server would still run. Thanks in www.doorway.ruted Reading Time: 1 min.
I have a DL G5 running WinSrvr with a 3 drive (72GB) SAS Raid 5 array on Pi controller. The single array has two partitions. (OS and a data store) Drive 2 has failed and is off line (Amber lite and internittant beeps) I have replacement drives but cannot find step by step instruction on a hot swap and drive rebuild. Re: DL G5 Hard Drive Bay 5 6 not showing up. I suppose that you have an E controller. Yes, it originally supports 4 HDDs but if you installed the so called BBWC (the cache module) you will be able to access all the 6 drives. With cache module this controller supports up to 6 HDDs and you can use raid 0. On the old DL G5, I was able to sucessfully install both the Base Driver and the IPMI driver on both Windows Server Standard and now Windows Server Standard (Yes, you read that right). The two installers you need are CP and CP (You're on your own to find them) Unfortunately you cannot just run the installers.
The HP ProLiant DL G5 is now available with the latest Intel processor refresh Performance Models: HP Smart Array Pi/MB BBWC Controller (RAID. HP Smart Array Pi Controller ://www.doorway.ru 1 x PCI Express x8 altura completa. Tarjeta Controladora RAID: HP Smart Array Pi con modulo de MB de Cache + bateria BBWC Controller (RAID 0/1/1+0/.
0コメント